| 价格 | ¥ 260.00 | ¥ 240.00 | ¥ 220.00 |
| 起批量 | 1-4 桶 | 5-19 桶 | ≥20 桶 |
| 产地 | 浙江 | 是否进口 | 否 | 类别 | 钢丝绳润滑保养专用 |
| 货号 | YNS-Z300 | 型号 | YNS-Z300 | 品牌 | 优耐圣 |
| 锥入度 | 265-295 | 滴点 | 大于120 | 针入度 | 350(mm) |
| 稠化剂类型 | 锂基润滑脂 | 应用领域 | 钢丝绳 | 比重 | 0.88-0.91 |
| 倾点 | -20 |



包装说明:上图为原包装(老包装),下图为新包装。客户可以自有选择,拍的时候也可以备注。如果不备注或者不说明,按新包装发货。
产品介绍/Product introduction:
本产品采用羟基脂肪酸锂皂稠化精制矿物油,加入多种功能添加剂调和而成,适用于钢丝绳的润滑与封存,可自然渗入丝芯链芯等难润滑部位,供给并保持合理的油膜润滑。
基本信息/ Basic Information:
|
base Oil |
Refined mineral oil. |
Suitable for lubrication and stock of steel wire ropes, seeping naturally in to the core of the rope, providing reasonable lubrication. |
|
Thickener |
Hydroxy stearate lithium soap. |
|
|
Additives |
A variety of additives. |
技术指标/ Typical Values:
|
项目 |
Item |
技术指标/Typical Values |
|
外观 |
Appearance |
均匀油膏 Smooth ointment |
|
工作缀锥入度 0.1mm |
Worked cone penetration, 0.1mm |
265~295 |
|
滴点 oC ≥ |
Dropping Point, oC ≥ |
120 |
|
腐蚀(T2铜片,100℃,24h) |
Corrosion(T2 sheet copper,100oC,24h) |
铜片无绿色或黑色变化 No green or black change |
|
延长工作锥入度 0.1mm ≤ |
ProlongedWorked cone penetration, 0.1mm ≤ |
350 |
|
水淋流失量(38℃,1h) % ≤ |
Sprinkling loss (38oC,1h) % ≤ |
8 |
性能特点/Features:
|
→良好的防锈性,有效隔绝钢丝绳与湿气,盐雾的接触,降低钢丝绳外部的腐蚀。 |
→Great property of anti corrosion, effectively preventing the steel wire rope from contacting moisture or salt frog, lowering the probability of contacting external corrosion. |
|
→良好的粘附性和渗透性,使用中不易流失和滑落,从而保持工作环境干净整洁。 |
→Great properties of adhesivity and penetrability, no easy leaking during operation, ensuring clean working environment. |
|
→良好的极压抗磨性,减少磨损。延长钢丝绳的使用寿命。 |
→Great properties of anti wear and extreme pressure, prolong steel rope lifetime. |
|
→良好的抗水淋性,能抵抗雨水的冲刷,确保满足各种气候条件下的使用要求。 |
→Great property against water sprinkling, ensuring requirements of different working weather. |
使用范围/Application:
|
→适用于钢丝绳及需导轨、夹条、滑道、链条的润滑与封存。 |
→Suitable for lubrication and stock of steel rope, guide rail, clip band, slide rail and chain etc. |
使用温度/Temperature range: -20oC~80oC.
注意事项:
1、使用前应对金属零部件进行除锈、清洗、干燥等工序。
2、勿用手直接接触已涂油的金属部件,以免破坏所形成的防护油膜
3、需热涂使用时,加热油温控制在40~50℃之间最适宜。
包装形式:16L/塑桶






